ABSTRACT
Objective:To establish a simplified anatomical model with the selected rabbits widely distributed in China′s dry region as the reference species and compare the result of internal exposure dose coefficients based on the present mode and ERICA.Methods:A simplified anatomical model based on anatomy and geometry was established for rabbits. Combined with Monte Carlo program, the deposited energy of radionuclide particles in rabbit tissues/organs was obtained, and the internal and external exposure dose coefficient for rabbits was calculated following the empirical formula.Results:Simplified anatomy model-based dose coefficients were 129I 4.81 × 10 -6, 137Cs 4.34 × 10 -5, and 134Cs 3.81 × 10 -5(μGy·h -1)/(Bq·kg -1) for internal exposure and 129I 3.16 × 10 -7, 137Cs 2.39 × 10 -4 and 134Cs 6.22 × 10 -4(μGy·h -1)/(Bq· kg -1) for external exposure. respectively. ERICA-based dose coefficients were 129I 4.44 × 10 -5, 137Cs 1.94 × 10 -4 and 134Cs 2.34 × 10 -4(μGy·h -1)/(Bq·kg -1) for internal exposure and 129I 2.19 × 10 -6, 137Cs 2.52 × 10 -4 and 134Cs 6.95 × 10 -4(μGy·h -1)/(Bq·kg -1) for external exposure, respectively. Conclusions:The simplified anatomical model established is based on the measured data and focuses on the radiation doses to biological tissues/organs, and the calculated result based on the present model are closer to the actual situation, and can provide reference values for the reference biological evaluation of non-human species.
ABSTRACT
The absorption is the key to the resulted efficacy of orally administered drugs and the small intestine is the main site to absorb the orally administered drug. In this paper, internationally recognized human colon adenocarcinoma cell line(Caco-2) monola-yer model which can simulate small intestinal epithelial cell was used to comparatively study the absorption and transportation diffe-rences of total coumarins and main individual coumarin in Angelica dahurica 'Yubaizhi' by separately using 6-and 12-well plates. It was found that apparent permeability coefficient(P_(app)) values of oxypeucedanin hydrate, byakangelicin and phellopterin were at the quantitative degree of 1 × 10~(-5) cm·s~(-1) when the individual administration was conducted independently, indicating that they were well-absorbed compounds. P_(app) ratio of their bi-directional transportation was close to 1, indicating that they can be absorbed across Caco-2 monolayer by passive diffusion mechanism without carrier mediation during the transportation. The similar trend of transportation was also observed for imperatorin, isoimperatorin and bergapten. The P_(app) values of oxypeucedanin hydrate, byakangelicin and bergapten were at quantitative degree of 1 × 10~(-5) cm·s~(-1) when the administration of total coumarins in Angelica dahurica 'Yubaizhi' was conducted, indicating that they were well-absorbed compounds. The results were consistent with those of independent administration of individual coumarins. Whereas, the P_(app) values of imperatorin, phellopterin and isoimperatorin in the total coumarins decreased, indicating that the interaction between compounds may exist although the P_(app) value ratio of bi-directional transportation was between 0.5 and 1.5. The results laid the foundation for intestinal absorption study of Angelica dahurica 'Yubaizhi' coumarins in compound Chinese medicine.
Subject(s)
Humans , Angelica , Caco-2 Cells , Coumarins , Drugs, Chinese Herbal , Intestinal Absorption , Plant RootsABSTRACT
Objective:To validate the feasibility of establishing a dosimetric model for insect species by investigating the ecological environment of an inland site in the northwestern China.Methods:For Damalacore, a simplified anatomical model based on anatomy and geometry and a model based on CT scan sequence image were established to produce a voxel model. In combination with the Monte Carlo particle transport process, the deposited energy of the radionuclides in the insect tissues/organs was obtained. The dose rate from 90Sr and 137Cs to Damalacore was calculated on the basis of empirical formula. Results:The dose rate from internal exposure to the simplified anatomical model was 8.58×10 -2for 90Sr and 4.25×10 -3μGy/h for 137Cs, whereas the dose rate from external exposure to the simplified anatomy model was 2.81×10 -2for 90Sr and 2.56×10 -1μGy/h for 137Cs, respectively. The internal exposure to the voxel model from 90Sr and 137Cs was 3.91×10 -2and 2.91×10 -3μGy/h, whereas the external exposure to the voxel model from 90Sr and 137Cs was 2.81×10 -2 and 2.56×10 -1μGy/h, respectively. The internal exposure from 90Sr and 137Cs to ERICA model was 1.46×10 -1 and 1.46×10 -2μGy/h, whereas the external exposure to the ERICA model from 90Sr and 137Cs was 5.79×10 -2 and 2.58×10 -1μGy/h, respectively. Conclusions:The calculated results based on the two models are similar to those based on ERICA model and therefore are proved reliable. With improved model accuracy, the calculated result are more close to the practical situation and feasible.
ABSTRACT
Objective: The measurement of compounded topical medications’ uniformity is an important component of quality assessment. This study was aimed to evaluate appropriate mixing time for external preparations using a planetary centrifugal mixer.Methods: In order to evaluate the product uniformity of mixtures of five different steroid cream (Antebate®, Myser®, Methaderm®, Lidomex®, and Locoid®) with three different heparinoid oil-based cream (Hirudoid®, “Nichi-Iko” cream and “Nipro” cream), steroid cream and heparinoid oil-based cream (5 g each) were added into a 13 mL container and mixed using the mixer (NanKo Rentaro NRE-120®, THINKY) at rotation speed of 800 rpm and revolution speed of 2,000 rpm. We sampled 0.1 g of the mixture from three spots (top, middle, and bottom portions) of the container then, measured the steroid content by HPLC method. The yield value points of each cream and heparinoid oil-based cream were also measured by spread meter.Results: Our results showed that when the coefficient of variation (CV) is less than 15.2 %, a mixing time of at least 120 s was required to achieve proper mixing to obtain the permissible limit of steroid cream and heparinoid oil-based cream. Also the greater difference of the yield value between steroid cream and heparinoid oil-based cream tended to be mixed easier.Conclusions: These results suggest that the spread ability of steroid cream and heparinoid oil-based cream affects the mixing efficiency of a planetary centrifugal mixer.
ABSTRACT
Objectives: The main objective of the current study is to examine the items using the item analysis to assess their competency of knowledge in human anatomy. Methods: This is a quantitative descriptive cross-sectional study conducted at the Najran University faculty of Medicine, in the department of anatomy. A 31-second year MBBS students of level three took the multiple-choice question exam comprising 100 questions in one session. Each item was analyzed by item analysis. The planned period of data collection is the first semester of the academic year 2019-2020. The data were analyzed using SPSS version 25, and Excel Software. All analyses were performed using the descriptive frequency, explore and correlation probabilities a p-value, p<0.01 (2-sided) was considered to indicate statistical significance. Results: The assessment of test items use the item analysis that is very difficult question: 25; 25%, difficult question: 8; 8%, average question: 46; 46%, easy questions; 9; 9% and very easy: 9; 9%. The discrimination indices, which are poor discrimination; 34; 34%, acceptable discrimination; 11; 11%,good discrimination; 6; 6%, very good discrimination; 4; 4% and excellent discrimination; 45; 45%. The performance of students in this test showing that a large number of items have a role in distinguishing students knowledge in the anatomy test, but in Simple parts of the scale that the items did not succeed in assessing students. Items of anatomy exams displayed a strong relationship of difficulty (P) and discrimination (D) indices. Conclusion: The MCQs items assess their competency of knowledge in human anatomy. The competence of students in the knowledge of anatomy measured at a high rate of A-type context-rich MCQs can be stem is case scenario, lead-in; question and options; distractors, and key. These items can differentiate good and poor accomplishment students..
ABSTRACT
Objective: To evaluate the effect of low molecular weight chitosan (LMW-CTS) and its nanoparticles (LMW-CTS-NPs) on the intestinal permeability of Panax notoginseng saponins (PNS) by using Caco-2 cell model. Methods: LMW-CTS was prepared by combining chitosanase hydrolysis combined with ultrafiltration separation technology, and molecular weight of LMW-CTS was determined by using permeation gel chromatography (GPC). LMW-CTS-NPs were prepared by ionic gel method, and characterized by scanning electron microscopy, nano particle sizer, and flourier transformation infrared spectroscopy. Caco-2 cell model was established and validated to evaluate the effects of LMW-CTS and LMW-CTS-NPs on the intestinal permeability of PNS. Results: LMW-CTS has a molecular weight of 5 760 and a polydispersity coefficient of 1.42. LMW-CTS-NPs have a round shape and narrow particle size distribution, with an average particle size of 115.5 nm and zeta potential of +37.1 mV. The apparent permeability coefficients (Papp, AB→BL) of PNS was less than 1 × 10-6 cm/s, indicating a poor permeability. In LMW-CTS group, the Papp of R1 and Rg1 was increased by 17.83% and 20.29%, respectively, but no significant effect of promotion was observed on other components. However, the Papp of R1, Rg1, Re, Rb1, and Rd in LMW-CTS-NPs group was increased by 35.66%, 23.28%, 29.41%, 37.99%, and 36.00%, respectively, compared tothe control group. Conclusion: LMW-CTS can significantly promote the intestinal mucosal permeability of R1 and Rg1 in PNS, but has no significant effect on Re, Rb1, and Rd. LMW-CTS-NPs significantly increased the permeability of the major monomer saponin components in PNS. Namely, the intestinal permeability of PNS can be further improved by transforming LMW-CTS into LMW-CTS-NPs.
ABSTRACT
Background@#The size of the glenoid bone defect is an important index in selecting the appropriate treatment for anterior shoulder instability. However, the reliability of glenoid bone defect measurement is controversial. The purpose of the present study was to investigate the reliabilities of measurements of the glenoid bone defect on computed tomography and to explore the predisposing factors leading to inconsistency of these measurements.@*Methods@#The study population comprised 69 consecutive patients who underwent surgery for recurrent anterior shoulder dislocation in Peking University Fourth School of Clinical Medicine from March 2016 to January 2017. The glenoid bone defect was measured by three surgeons on 'self-confirmed’ and 'designated’ 3-D en-face views, and repeated after an interval of 3 months. Measurements included the ratio of the defect area to the best-fit circle area, and the ratio of the defect width to the diameter of the best-fit circle. The inter- and intra-observer reliabilities of the measurements were evaluated using intraclass correlation coefficients (ICCs). The maximum absolute inter- and intra-observer differences and the cumulative percentages of cases with inter- and intraobserver differences greater than these respective levels were calculated.@*Results@#Almost all linear defect values were bigger than the areal defect values. The inter-observer ICCs for the areal defect were 0.557 and 0.513 in the 'self-confirmed’ group and 0.549 and 0.431 in the 'designated’ group. The inter-observer reliabilities for the linear defect were moderate or fair in the 'self-confirmed’ group (ICC = 0.446, 0.374) and 'designated’ group (ICC = 0.402, 0.327). The ICCs for intra-observer measurements were higher than those for inter-observer measurements. The respective maximum interand intra-observer absolute differences were 13.9% and 13.2% in the 'self-confirmed’ group, and 15.8% and 9.8% in the 'designated’ group.@*Conclusions@#The areal measurement of the glenoid bone defect is more reliable than the linear measurement. The reliability of the glenoid defect areal measurement is moderate or worse, suggesting that a more accurate and objective measurement method is needed in both en-face view and best-fit circle determination. Subjective factors affecting the glenoid bone loss measurement should be minimized.
ABSTRACT
Objective@#To explore the characteristics of the default memory network (DMN) and working memory network (WMN) at resting state brain functional network of exercise addiction people.@*Methods@#Twenty-nine sports addicts and 26 non-sports addicts matched by sex, age, average education level and sports dependence were screened by the exercise addiction index (EAI). Resting status brain scanning was performed with 3.0T magnetic resonance scanner.Sparse approximation coefficients independent component analysis (SACICA) model was used to analyze the independent components of brain networks.@*Results@#Compared with the DMN template, four features were extracted, including " basic conformity" , " less frontal lobe" , " more frontal lobe" and " less occipitoparietal lobe" . Compared with the parameters of " basic conformity" , the proportion of exercise addiction group (33.3%, 9/27) was higher than that of control group (18.2%, 4/22). In the other three parameters, the proportion of exercise addiction group (37.0%, 10/27; 3.7%, 1/27; 22.2%, 6/27) was lower than those of control group (45.5%, 10/22; 22.7%, 5/22; 27.3%, 6/22). But Chi-square test showed that there was no significant difference between the two groups(all P>0.05). Compared with the WMN template, six features were extracted, including " basic conformity" , " more frontal and parietal lobes" , " more parietal lobes" , " more frontal lobes" , " less frontal lobes" and " less parietal lobes" . The percentages of the first three features in exercise addiction group (22.2%, 6/27; 7.4%, 2/27; 7.4%, 2/27) were less than those in the control group (45.5%, 10/22; 22.7%, 5/22; 9.1%, 2/22), while the percentages of the last three features in the exercise addiction group (7.4%, 2/27; 37.0%, 10/27; 14.8%, 4/27) were higher than those in the control group (4.5%, 1/22; 13.6%, 3/22; 0, 0). Chi-square test showed that there was no significant difference in all features between the two groups was statistically(P>0.05).@*Conclusion@#No significant characteristic changes are found in DMN and WMN networks of exercise addiction population.
ABSTRACT
BACKGROUND@#Low-dose exposure to organophosphate (OP) insecticides during pregnancy may adversely affect neurodevelopment in children. To evaluate the OP exposure levels, single urine sampling is commonly adopted to measure the levels of dialkylphosphates (DAPs), common OP metabolites. However, the inter-day variations of urinary DAP concentrations within subjects are supposed to be large due to the short biological half-lives of the metabolites, and it is thus considered difficult to accurately assess OP exposure during pregnancy with single sampling. This study aimed to assess intra-individual variations of DAP concentrations and the reproducibility of the exposure dose categorization of OPs according to DAP concentration ranges in pregnant women in Japan.@*METHODS@#Urine samples were collected from 62 non-smoking pregnant women (12-22 weeks of gestation) living in Aichi Prefecture, Japan. First morning void (FMV) and spot urine samples taken between lunch and dinner on the same day were collected on five different days during 2 weeks. The concentrations of DAP and creatinine in urine samples were measured using an ultra performance liquid chromatography with tandem mass spectrometry. Creatinine-adjusted and unadjusted concentrations were used for the intraclass correlation coefficient (ICC) calculations and surrogate category analyses.@*RESULTS@#For all DAP metabolites, the creatinine-adjusted single ICCs exceeded 0.4, indicating moderate reliability. Overall, ICCs of spot urine samples taken in the afternoon were better than those taken as FMV. Surrogate category analyses showed that participants were categorized accurately into four exposure dose groups according to the quartile points.@*CONCLUSION@#This study indicated that a single urine sample taken in the afternoon may be useful in assessing OP exposure as long as the exposure is categorized into quartiles when conducting epidemiological studies in early to mid-pregnant women in Japan.
Subject(s)
Adult , Female , Humans , Pregnancy , Young Adult , Chromatography, Liquid , Creatinine , Urine , Environmental Exposure , Environmental Monitoring , Methods , Environmental Pollutants , Urine , Japan , Mass Spectrometry , Organophosphates , Urine , Pesticides , Urine , Pregnant WomenABSTRACT
Resumen Introducción Esta investigación se busca la conceptualización de las teorías y el desarrollo metodológico para lograr el objetivo que es contribuir al conocimiento experimental acerca de coeficientes de descarga para orificios circulares de pared delgada, no sumergidos, dada la limitada información encontrada sobre los mismos. Los Materiales y métodos consistieron en desarrollar un modelo físico experimental, que se desarrolló en el Laboratorio Piloto de Hidráulica de la Facultad de Ciencias Matemáticas y Físicas, Universidad de Guayaquil -Ecuador, ubicado a 4,00 m.s.n.m., con una temperatura ambiente promedio de 26 °C y una humedad relativa media del 75 %. Se construyeron 8 orificios circulares entre 6 y 48 mm de diámetro usando como material el polimetilmetacrilato (acrílico), fueron considerados aproximadamente 300 datos a través del método experimental, en el cual, el caudal real se evaluó volumétricamente, mientras que, el coeficiente de descarga se determinó mediante la relación entre caudal real y caudal teórico, teniendo como resultados coeficientes de descarga que oscilan entre 0,76-0,56, resultados presentados en el ábaco FCMF-UG-Cd-OCPD-2018, que considera el coeficiente de descarga vs la relación carga hidrostática/diámetro del orificio. Mediante comparaciones con fuentes bibliográficas. Conclusión. Los valores de coeficientes de descarga obtenidos en esta investigación son válidos según las condiciones de flujo de estudio, siendo estos de gran aporte a estas estructuras donde se emplea orificios como desarenadores, captaciones y sumideros.
Abstract Introduction This research seeks the conceptualization of the theories and the methodological development to achieve the objective that is to contribute to the experimental knowledge about discharge coefficients for circular holes of thin wall, not submerged, given the limited information found on them. The Materials and methods consisted of developing an experimental physical model, which was developed in the Pilot Laboratory of Hydraulics of the Faculty of Mathematical and Physical Sciences, University of Guayaquil-Ecuador, located at 4.00 meters above sea level, with an average ambient temperature of 26 ° C and an average relative humidity of 75%. We built 8 circular holes between 6 and 48 mm in diameter using polymethylmethacrylate (acrylic) as a material, approximately 300 data were considered through the experimental method, in which, the actual flow was evaluated volumetrically, while the discharge coefficient was determined by the relationship between real flow and theoretical flow rate, resulting in discharge coefficients ranging between 0.76-0.56, results presented in the abacus FCMF-UG-Cd-OCPD-2018, which considers the discharge coefficient vs the hydrostatic head / hole diameter ratio. Through comparisons with bibliographic sources. Conclusion: The values of discharge coefficients obtained in this investigation are valid according to the study flow conditions, these being of great contribution to these structures where holes are used such as desarenadores, catchments and drains.
Resumo Introdução Esta conceituação de teorias e desenvolvimento metodológico pesquisa visa atingir o objectivo que é o de contribuir para o conhecimento experimental sobre coeficientes de descarga para furos circulares de paredes finas, não submersa, dada a pouca informação encontrada neles. Materiais e métodos foram desenvolver um modelo experimental físico, o que foi desenvolvido no Piloto Hidráulica Laboratório da Faculdade de matemática e Physical Sciences, University of Guayaquil-Equador, localizado 4,00 m, com uma temperatura ambiente média de 26 ° C e umidade relativa média de 75%. 8 furos circulares, entre 6 e 48 mm de diâmetro, usando como material de polimetilmetacrilato (acrílico) foram construídos, foram consideradas aproximadamente 300 de dados por meio de método experimental, em que o caudal real foi avaliada volumetricamente enquanto o coeficiente de descarga determinada pela relação entre o caudal actual e o fluxo teórico, com os coeficientes de descarga resultado que variam 0,760,56, os resultados apresentados na FCMF-UG-Cd-OCPD-2018 ábaco, que considera o coeficiente de descarga vs a relação de diâmetro cabeça hidrostática / buraco. Através de comparações com fontes bibliográficas. Conclusão coeficientes de descarga valores obtidos nesta investigação são válidos como as condições de escoamento de estudo, sendo estas grande contribuição para essas estruturas onde furos como armadilhas de areia, depósitos e pias utilizados.
ABSTRACT
Background: The accurate, reliable and timely assessment of students is an essential domain of teaching duringMedical professional courses. The Multiple Choice Questions (MCQ) are time tested method of ready assessmentof undergraduate students. Although it evaluates student’s cognitive knowledge but does not evaluate professionalskills. However it is said that MCQs emphasize recall of factual information rather than conceptual understandingand interpretation of concepts.Objectives: The main objective of the study is to analyse the items with the help of item analysis and select theitems which are good for incorporation into future question bank with reliability.Materials and Methods: This study was done in Department of Anatomy, AIIMS, Patna. A 396 first year MBBSstudents of different batches took the MCQ test comprising 60 questions in two sessions. During the evaluationprocess of MCQ’s each correct response was awarded one mark and no marks was awarded for any incorrectresponse. Each item was analysed for difficulty index, discrimination index and distractor effectiveness.Results: The overall mean of Facilitative value, Discrimination Index, Distractor Effectiveness and CorrelationCoefficient was 66.09 (±21.55), 0.26 (±0.16), 18.84 (±10.45) and 0.55±0.22 respectively.Conclusion: The framing of MCQ should be according to Bloom’s classification to assess cognitive, affective aswell as psychomotor domain of the students. The MCQ having poor and negative discrimination should bereframed and again should be analysed.
ABSTRACT
Objective To analyze the changes and gender differences of organ coefficients, intestinal length and body size of SJ5-SPF chickens at different weeks of age,and to provide experimental data for the sex selection of laboratory chickens. Methods The body weight,the weight of 15 main organs,and length of 5 main segments of intestine and the 6 main parameters of body size of SJ5-SPF chickens at the age of 4,20,25 and 40 weeks were measured,respectively,and the organ coefficients were calculated. In addition, the gender differences in body weights, organ coefficients, intestinal lengths and body sizes between the female and male SJ5-SPF chickens at the four different weeks of age were compared, respectively. Results There were significant differences in body weights between the male and female SJ5-SPF chickens at each of the four different weeks of age(P < 0.01). The organ coefficients varied between females and males to different extents at different weeks of age. As for the intestinal length,there were no significant differences in the length of jejunum and ileum as well as rectum between the male and female chickens, while the length of duodenum, left cecum and right cecum showed gender differences at some of the four different weeks of age. During the determination of body size, there were gender differences in body length,shank length,pelvic width,chest depth and chest width at two or three of the four different weeks of age. Conclusions The organ coefficients, intestinal length and body size of SJ5-SPF chickens are affected by both their age and gender.
ABSTRACT
Objective To investigate the correlation between DWI value of cervical cancer in stage Ib1-II A2 and its pelvic lymph node metastasis. Methods 103 patients with cervical cancer of stage Ib1 - IIa2 confimed by surgery and pathology in our hospital from January 2014 to July2016 were retro-spectively studied,78 cases of cervical squamous cell carcinoma group(lymph node metastasis of 22 cases,non- lymph node metastasis 56 cases);25 cases of Cervical adenocarcinoma group(9 cases with lymph node metastasis,16 cases of no lymph node metastasis). All patients with preoperative were performed MR routine scan and DWI examination. The ADC value(meanADC,minADC and maxADC)between the two groups and between the groups with and without metastasis were statistically analyzed. Results The value of ADC staging of cervical carcinoma had no correlation with clinical FIGO stage(Pmean = 0.847、Pmin = 0.393、Pmax = 0.219). The meanADC values、minADC value、maxADC value[(0.84 ± 0.09)× 10-3mm2/s、(0.78 ± 0.09)× 10-3mm2/s、(0.86 ± 0.07)× 10-3 mm2/s]of Squamous cell carcinomas was lower than that of adenocarcinoma[(0.98 ± 0.04)× 10-3mm2/s、(0.93 ± 0.09)×10-3mm2/s、(0.97 ± 0.23)× 10-3mm2/s]and the difference was statistically significant(P <0.05). The meanADC values and minADC value of cervical cancer within each group in lymph node metastasis group was lower than that of non- lymph node metastasis group,the difference was statistically significant(P <0.05). The maxADC value had no significant difference(P > 0.05). Conclusion The ADC value of cervical cancer has some correlation with lymph node metastasis,which can be helpful to predict the risk of lymph node metastasis.
ABSTRACT
Objective To determine the solubility of rhein in different vehicles and its partition coefficients in the n-octanol-water system for designing new formulations. Methods High performance liquid chromatography(HPLC) method was established to determine the concentration of rhein in water,different pH solutions and different solvents;the partition coefficients for the n-octanol- buffer solution systems were determined by shaking flask method. Results The equilibrium solubility of Rhein was 3.89 μg·mL-1and the lgP was 2.79 in water at 37 ℃.The solubility of rhein was increased with the raise of pH, which could reach 362.20 and 431.65 μg·mL-1in phosphate buffer solution at pH 6.8 and 7.4,respectively.Solubility of rhein in the semi polar solvent was relatively good,which can up to 2 971.74 μg·mL-1in PEG400.The oil-water partition coefficients of rhein were decreased with the increase of pH,and were 0.83 and 0.54 in phosphate buffer solution at pH 6.8 and 7.4,respectively. Conclusion Rhein is almost not soluble in water.With the raise of pH,the solubility is increased but the oil-water partition coefficient is decreased.
ABSTRACT
OBJECTIVE: Differentiating unicystic ameloblastomas from keratocystic odontogenic tumors (KCOT) is necessary for the planning of different treatment strategies; however, it is difficult based on conventional CT and MR sequences alone. The purpose of this study was to investigate the utility of diffusion-weighted imaging (DWI) and apparent diffusion coefficients (ADCs) in the differentiation of the two tumors. MATERIALS AND METHODS: We prospectively studied 40 patients with odontogenic cysts and tumors of the maxillomandibular region using conventional MR imaging and DWI. ADCs were measured using 2 b factors (500 and 1000). RESULTS: Unicystic ameloblastomas (n = 11) showed free diffusion on DWI and a mean ADC value of 2.309 ± 0.17 × 10-3 mm2/s. KCOT (n = 15) showed restricted diffusion on DWI with a mean ADC value of 0.923 ± 0.20 × 10-3 mm2/s. The ADC values of unicystic ameloblastomas were significantly higher than those of KCOT (p < 0.001, Mann-Whitney U-test). An ADC cut-off value of 2.0 × 10-3 mm2/s to differentiate KCOT and unicystic ameloblastomas resulted in a 100% sensitivity and 100% specificity. Dentigerous cysts (n = 3) showed restricted diffusion on DWI and similar ADC values (1.257 ± 0.05 × 10-3 mm2/s) to those of KCOT. CONCLUSION: Diffusion-weighted imaging and ADC determination can be used as an adjuvant tool to differentiate between unicystic ameloblastomas and KCOT, although the ADC values of dentigerous cysts overlap with those of KCOT.
Subject(s)
Humans , Ameloblastoma , Dentigerous Cyst , Diffusion , Magnetic Resonance Imaging , Odontogenic Cysts , Odontogenic Tumors , Prospective Studies , Sensitivity and SpecificityABSTRACT
ABSTRACT Corn is one of the primary ingredients in swine diets, but there is a variation in its chemical composition and metabolizable energy (ME) content. Therefore, faster methods are required that can determine more accurate ME values to improve piglet diets. This study determined and predicted the ME of corn from first and second harvests for piglets. Two experiments were conducted to determine the ME values for 18 corn batches, evaluating corn from first and second harvests. The corn batches were analysed to determine the concentration of dry matter (DM), starch (ST), neutral detergent fiber (NDF), acid detergent fiber (ADF), crude protein (CP), ether extract (EE), ash, calcium (Ca), phosphorus (P) and gross energy (GE). To determine the ME values, 40 piglets were used in each experiment, grouped into a randomized block design with four replicates. The ME of the corn from the first and second crops ranged from 3281 to 3509 and from 3143 to 3652 kcal/kg on an as-fed basis, respectively, and the fitted equations to predict the ME presented a low R2. The best fit equation for predicting the ME of corn for piglets was determined to be ME= - 6306.15 + 400.652ADF + 117.286ST + 24924.7Ca + 2489.66P - 148.41CP (R2=0.44) for the first harvest; ME= -7560.08 + 2.66895GE - 120.69ADF (R2=0.48) for the second harvest; and ME= 2848.95 + 68.5714NDF + 161.938EE - 5563.5Ca - 1454.2P (R2=0.41) for the joint harvest.
RESUMO O milho é um dos principais alimentos utilizados em rações para suínos, porém existem variações em sua composição química e conteúdo de energia metabolizável (EM). Portanto, são necessários métodos rápidos para se determinar os valores de EM de forma precisa, melhorando as dietas dos leitões. O trabalho determinou e ajustou equações de predição de EM do milho de 1a e 2a safra para leitões. Foram realizados dois experimentos para determinar os valores de EM de 18 cultivares de milho, avaliando-se os milhos de 1ª e 2ª safras. Foram realizadas as análises de matéria seca (MS), amido (AMI), fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), proteína bruta (PB), extrato etéreo (EE), matéria mineral (MM), cálcio (Ca), fósforo (P) e energia bruta (EB) dos milhos. Para a determinação dos valores energéticos foram utilizados 40 animais em cada experimento, distribuídos em um delineamento experimental de blocos ao acaso com quatro repetições. Os valores de EM dos milhos de 1ª e 2ª safra variaram de 3281 a 3509 e de 3143 a 3652 kcal/kg MN, respectivamente, as equações ajustadas para predizer a EM apresentaram baixo R2. Os melhores ajustes para predizer a EM do milho para leitões são representados pelas equações EM= - 6306,15 + 400,652FDA + 117,286AMI + 24924,7Ca + 2489,66P - 148,41PB (R2=0,44), para os milhos de 1ª safra; EM = -7560,08 + 2,66895EB - 120,69FDA (R2=0,48), para os milhos de 2ª safra; e para o período completo de safras foi ajustada a equação EM= 2848,95 + 68,5714FDN + 161,938EE - 5563,5Ca - 1454,2P (R2=0,41).
ABSTRACT
Objetivou-se determinar a composição química, os valores energéticos e os coeficientes de digestibilidade ileal verdadeira de aminoácidos de sojas integrais tostadas de cinco regiões. No primeiro experimento, foram utilizados 288 pintos de corte machos da linhagem Cobb 500, com 13 dias de idade e peso médio de 420,0±5,0g. O delineamento experimental utilizado foi inteiramente ao acaso, com seis tratamentos (cinco sojas integrais e uma ração referência) e oito repetições de seis aves. No segundo experimento, foram utilizados 288 frangos de corte machos da linhagem Cobb 500, com 24 dias de idade e peso médio de 865,0±20,0g. O delineamento experimental utilizado foi inteiramente ao acaso, com seis tratamentos (cinco sojas integrais e uma ração isenta de proteína à base de amido) e oito repetições de seis aves. Não houve diferença em relação aos teores de EMAn e de CEMAn (P>0,05) entre as sojas integrais. Os valores médios de EMAn, CEMAn situaram-se entre 3152 e 3399kcal/kg e 61,15 e 65,08%, respectivamente. No entanto, houve diferença (P<0,05) entre os CAE, CANE e CPB das sojas integrais, e a amostra cinco obteve os menores valores. Os valores médios para os CAE e CANE da soja integral são de 88,96% e 87,53%, respectivamente.(AU)
The goal of this paper was to determine the chemical composition, the energy values and the amino acid true ileal digestibility coefficients of toasted full-fat soybeans from 5 regions. In the first experiment, 288 chicken broilers from Cobb 500 lineage with 13 days old and average weight of 420.0±5.0g were used. The experimental design was completely randomized with 6 treatments (5 full-fat soybean diets and 1 basal diet) and 8 replicates of 6 birds. In the second experiment, 288 chicken broilers from Cobb 500 lineage with 24 days old and average weight of 865.0±20.0g were used. The experimental design was completely randomized with 6 treatments (5 full-fat soybean diets and 1 protein-free diet based on starch) and 8 replicates of 6 birds. There was no difference regarding the AMEn and AMECn contents (P>0.05) among the full-fat soybeans. The average values of AMEn, AMECn were between 3152-3399 kcal/kg and 61.15 to 65.08%, respectively. However, there were differences (P<0.05) between CEA, CENA and CPC of full-fat soybeans, and sample 5 obtained the lowest values. The average values for CEA and CENA of the full-fat soybean are 88.96% and 87.53%, respectively.(AU)
Subject(s)
Animals , Amino Acids/analysis , Chickens/metabolism , Energy Metabolism , Food/analysis , Glycine max/chemistry , Animal Nutritional Physiological Phenomena , Diet/veterinaryABSTRACT
AIM To investigate the equilibrium solubilities,oil-water partition coefficients and in vitro skin permeation features of brucine and strychnine in total alkaloids from Strychni Semen.METHODS Saturated dissolution method was applied to determining the equilibrium solubilities of two constituents in ethanol (10％,20％,30％,60％,90％,anhydrous ethanol),trichloromethane,n-octanol and surfactants (0.5％ tween,0.5％ sodium deoxycholate,0.5％ oleic acid).Shake-flask method was adopted in detecting their oil-water partition coefficients in PBS (pH 2.5,4.0,5.0,5.8,6.8,7.0,7.4,9.0).Modified Franz diffusion cell method was used for evaluating their in vitro skin permeation features in PBS,20％ ethanol and anhydrous ethanol.RESULTS Both brucine and strychnine showed the highest equilibrium solubilities in trichloromethane and the lowest equilibrium solubilities in surfactants.The equilibrium solubility of strychnine was higher than that of brucine in ethanol (＞ 20％) or PBS (pH ＜ 8.0),which reached the highest in 60％ ethanol and pH 2.5 PBS,respectively.The similar oil-water partition coefficients of two constituents,proportional to pH value,reached the highest at pH9.0.And they exhibited the highest accumulated transdermal absorptivities in anhydrous ethanol and pH 9.0 PBS,respectively.CONCLUSION Solvent type has obvious effects on the equilibrium solubilities,oil-water partition coefficients and in vitro skin permeation features of both brucine and strychnine.This study can provide a reference for the bioavailability improvement of transdermal drug delivery and development of related preparations.
ABSTRACT
AIM To investigate the equilibrium solubilities,oil-water partition coefficients and in vitro skin permeation features of brucine and strychnine in total alkaloids from Strychni Semen.METHODS Saturated dissolution method was applied to determining the equilibrium solubilities of two constituents in ethanol (10％,20％,30％,60％,90％,anhydrous ethanol),trichloromethane,n-octanol and surfactants (0.5％ tween,0.5％ sodium deoxycholate,0.5％ oleic acid).Shake-flask method was adopted in detecting their oil-water partition coefficients in PBS (pH 2.5,4.0,5.0,5.8,6.8,7.0,7.4,9.0).Modified Franz diffusion cell method was used for evaluating their in vitro skin permeation features in PBS,20％ ethanol and anhydrous ethanol.RESULTS Both brucine and strychnine showed the highest equilibrium solubilities in trichloromethane and the lowest equilibrium solubilities in surfactants.The equilibrium solubility of strychnine was higher than that of brucine in ethanol (＞ 20％) or PBS (pH ＜ 8.0),which reached the highest in 60％ ethanol and pH 2.5 PBS,respectively.The similar oil-water partition coefficients of two constituents,proportional to pH value,reached the highest at pH9.0.And they exhibited the highest accumulated transdermal absorptivities in anhydrous ethanol and pH 9.0 PBS,respectively.CONCLUSION Solvent type has obvious effects on the equilibrium solubilities,oil-water partition coefficients and in vitro skin permeation features of both brucine and strychnine.This study can provide a reference for the bioavailability improvement of transdermal drug delivery and development of related preparations.
ABSTRACT
Objective To prepare multicomponent microemulsion of Chinese materia medica (CMM) with different oil-water partition coefficients (logP values) by simplex lattice method and evaluate its quality. Methods The surfactants, cosurfactants and oil phases were screened by saturated solubility method. Ochratins, ligustrazine, ferulic acid, puerarin and geniposide were model drugs to represent the complex components of CMM. Based on the pseudo-ternary diagram, simplex lattice method was adopted to optimize the multicomponent microemulsion of CMM with different logP values by appearance, particle size and polydispersity index as evaluation indexes. The experimental design and model building were constructed by Design Expert 8.06 software to optimize the response surface data analysis and validate the optimal prescription composition. The quality of microemulsion was evaluated by observing appearance and stability as well as measuring particle size and potential. Results The optimum formulation was oleic acid-Labrasol-propylene glycol-water (5.303:29.336:7.334:58.027). The prepared microemulsion was clear in appearance with good yellowish color and stable property. The average particle size was (118.77 ± 0.37) nm, PDI was 0.282 ± 0.02 and Zeta potential was (0.346 ± 0.05) mV. Conclusion The results indicated that the multicomponent microemulsion of CMM with different logP values is optimized and the drug loading was high. The multicomponents microemulsion of CMM with different logP values (-1.01-3.85) is established and optimized, providing a feasible microemulsion carrier for the multicomponent CMM to simplify its prescription screening work.